 |
Industry Applications
and Product Data: |
| |
External Mold Releases: |
|
Layup |
Sprayup |
Bagging |
|
|
Cultured Marble |
Solid Surfaces |
|
|
Mandrel Wrapping |
|
|
RTM |
SMC/BMC |
LPMC |
|
|
| |
|
|
|
| |
Internal Mold Releases: |
Epoxy |
|
|
|
|
|
| |
| The products shown on our website are just a sampling of hundreds of products that
we manufacture. Click on an underlined product number below to view a technical data sheet in PDF format. If you don't see what you need, contact us. Chances are we already have a product that is just right.
If not, we can custom formulate a product to meet your exact requirements. Before making your final product selection, we strongly advise
that you contact an Axel's Technical Service Representatives at 800-332-AXEL or 718-672-8300 for expert
guidance, and a free sample of the solution that is perfect for you. |
|
|
| |
|
| |
| |
|
Internal Mold Releases |
|
|
|
|
Recommendations based on compatibility with the many types of hardeners used to cure a typical Bisphenol-A epoxy resin. |
| |
|
|
| Cure |
Product
|
Typical Application |
Comments |
|
| Acid anhydride (example: MTHPA) |
INT-1846N
|
Pultrusion |
Tertiary amine or imidazole catalyzed. Extends bath life and reduces sloughing |
| Aliphatic amines |
INT-1850HT
|
Higher temperatures, >350F/175C |
Good thermal stability |
| Aliphatic amines (example:DETA) |
INT-1846N
|
|
Neutralized to prevent premature reaction with hardener, avoiding poor cured properties |
| Anhydride, general |
INT-1854
|
|
|
| Lewis acids (example:BF3.MEA) |
INT-1815
|
Rapid curing parts at low activation temperature |
Does not poison polymerization kinetics |
| Aromatic amines, MDA & non-MDA based |
INT-1846
|
Filament Winding |
Acidic for maximum surface effect |
| Acid anhydride (example: phthalic anhydride) |
INT-1890M
|
|
Mild catalysis imparted by lubricant improves production output |
| Anhydride, liquid |
INT-1810
|
Electrical components |
Clear, haze free castings |
| Water dispersable amines or polyamides |
INT- EP545 SL
|
|
Excellent dispersion in epoxy emulsions |
| Cycloaliphatic amines (example: PACM) |
INT-1840
|
Filament Winding |
Reduced Acidity |
| Aliphatic amines, flourene based |
INT-1824L
|
High temperature cures(>450F/230C) |
|
|
| |
| |
|
| |
Recommendations based on compatibility with the many types of hardeners used to cure a typical Bisphenol-A epoxy resin.
All Axel products are formulated from raw materials that comply with chemical substance inventory lists of TSCA, DSL, MITI, EINECS, Australia, and Korea. |
|
|
|
|
|
|
