|
"For
over fifty years we have been involved with thousands of problems
in thousands of applications -- and we might well have the formulation
up our sleeve that is just custom tailored to your exact application."
|
|
EXTERNAL
RELEASES
| Product
# |
Application |
Description |
| Solvent-Based |
| 250
Series |
Composite
Molding |
Polymer releases designed specifically
for cultured marble and cast polymers. Comprised of phosphate
esters, polyolefins and fatty acids. Easy to apply; cleans
and releases in one step. 4% solids. Releases: polyester.
Applications: Spray or wipe and wet polish. |
| 424/7NC |
Polyurethanes |
A polymer release suitable for releasing a
wide variety of urethane foams and elastomers. Release is
9% solids; may be used full strength or diluted up to 5X. |
AZN
(also as Aerosol) |
Injection
Molding,
Composite Molding,
Rubber & Elastomers |
A mixture of phosphate esters
and fatty acids. Dries to a wet film which offers good slip.
Releases: thermoplastics & many thermosets; also rubbers.
Applications: Spray or wipe. |
| F-23A-NC |
Composite
Molding |
A mixture of phosphate esters
and polyolefins in combination with fluoropolymer. Offers
good slip for filament winding and compression molding.
6% solids.
Releases: vinyl ester, polyester, epoxy, phenolic, hybrid
resins. Applications: Spray or wipe. |
F-57NC
(also as Aerosol) |
Injection
Molding,
Composite Molding,
Rubber & Elastomers |
A dry film release which is a
mixture of phosphate esters & polyolefins in combination
with fluoropolymer. Good heat stability and no transfer.
Suitable for compression molding, open molding, RTM and
many other processes. 5% solids. Releases: thermoplastics,
vinyl ester, polyester, epoxy, phenolic, hybrid resins,
natural & synthetic rubbers. Applications: Spray, brush
or wipe. Wet polish for cosmetic finish. |
| PTZ-2174F/NC |
Polyurethanes |
A good release for rigid
and semi-rigid polyurethane foams. Will not interfere with
secondary processes like painting and bonding. Contains
3.5% solids. |
| UFO-100 |
Polyurethanes |
Designed for
releasing open cell seating foam. |
| RimWiz uDU-21/NC |
Polyurethanes |
A release for RIM process
rigid foam. Will not interfere with bonding or painting
of finished parts. 3.5% solids. |
|
| Water-Based |
| 100NV |
Rubber
& Elastomers |
A water-based and
water-soluble concentrate. Used as an external rubber hose lubricant. |
| 249
Series |
Composite
Molding,
Rubber & Elastomers |
A water / alcohol
emulsion of phosphate esters and modified fatty acids: 6% solids.
A good choice for filament winding & hot press molding. Releases:
polyester, epoxy, acrylic, phenolic and rubber. Application: Wipe
or spray. |
| AMP-50 |
Laminates |
A water-based and
water-soluble concentrate with 50% solids. Used for releasing
decorative laminates, particle board and wood profiles. Can be
diluted to 1.5% solids. |
| EM-606SL/SP |
Composite
Molding,
Rubber & Elastomers |
A water / alcohol
emulsion of high polymer resins. Solvent enrichment enhances drying
and reduces buildup. A good choice for compression molding, casting
and filament winding. 6% solids. Releases: polyester, vinyl ester,
epoxy, phenolic & natural and synthetic rubber. Application:
Wipe or spray. |
| EM-1212 |
Composite
Molding,
Laminates,
Rubber & Elastomers |
A high solids polymer
release for applications that require extra slip. 12% solids.
Releases: polyester, vinyl ester, epoxy, phenolic & natural
and synthetic rubber.
Application: Wipe or spray. |
| EM-1212SF2 |
Composite
Molding,
Laminates,
Rubber & Elastomers |
Similar to EM-1212
but with fluoropolymer additives, making it even more effective
for demanding release situations. Suitable for non-cosmetic compression
molding & casting. |
| WB-GR-60 |
Rubber
& Elastomers,
Polyurethanes |
A polymer release
which provides excellent slip without silicone. A good choice
for hot molding and applications where secondary bonding is required.
3% solids. Releases: natural & synthetic rubbers and polyurethane
elastomers. Application: Spray. |
| WB-215A |
Polyurethanes |
A thick, liquid release for
semi-rigid/self-skinning foam. Apply by brushing or wiping. Mold
release does not need to dry before molding. |
| WB-411 |
Polyurethanes |
A non-flammable
water / solvent emulsion of high polymeric resins. Suitable for
releasing all types of polyurethane. 10% solids. Application:
Spray. |
| WB-640 |
Polyurethanes |
A complex polymer
emulsion with wetting agents suitable for warm or hot molding
applications. Will not interfere with secondary bonding. 6% solids.
Releases: rigid and semi-rigid polyurethane and natural &
synthetic rubbers. Application: Spray. |
| WB-640SP |
Polyurethanes |
Similar to WB-640,
but contains a small amount of solvent enrichment to speed drying
at ambient temperatures. May also be used on warm molds. Will
not interfere with secondary bonding. 5% solids. Releases: rigid
and semi-rigid polyurethane and natural & synthetic rubbers.
Application: Spray. |
| WB-640H |
Polyurethanes |
A thickened version
of WB-640 intended for non-cosmetic molding applications where
a brushable release is required. Releases: rigid & semi-rigid
polyurethane and natural & synthetic rubbers. Application:
Brush. |
| WB-2000 |
Polyurethanes |
A good release for inmold coatings. |
| WFF-352 |
Polyurethanes |
A polymer release
emulsion, formulated for flexible polyurethane and semi-rigid
foams. Will not interfere with secondary bonding. 2% solids. Application:
Spray. |
| WPO-100 |
Polyurethanes |
Designed for releasing open
cell seating foam. |
| Barrier
Films |
| FF1H |
Composite
Molding,
Polyurethanes |
A film-forming barrier
release agent in a water / alcohol carrier. The film transfers
to the molded part, becoming an integral part of the molded piece
and will not interfere with bonding, painting or staining. Releases:
rigid polyurethane and polyester. Application: Spray or brush. |
| FF1H-15P |
Composite
Molding,
Polyurethanes |
Same product as
FFIH but specially designed to wet on RTV silicone molds. |
| Paste |
| PasteWiz |
Composite
Molding,
Polyurethanes |
A reduced solvent, high temperature
paste release. Suitable for many composite molding applications.
Releases: polyester, vinyl ester and polyurethane. Application:
Wipe on; polish. |
| Semi-Permanent
Coatings |
| |
| W
a t e r - b a s e d |
| MoldWiz
Product # |
Application |
Effective
Cure |
Processing
Temp |
Resin / Rubber |
Comments |
| AE-72 |
Composite
Molding, Rubber & Elastomers |
30 minutes @ 125-300F / 55-150C
|
125-400F / 50-200C
|
Composites: polyester,
vinyl ester & phenolics.
Natural & synthetic rubber. Not recommended for Silicones. |
More durable coating
than AE-72L. |
| AE-72L |
Composite
Molding, Rubber & Elastomers |
30 minutes @ 125-300F / 55-150C
|
125-400F / 50-200C
|
Composites: epoxy,
prepreg, polyester, vinyl ester & phenolics. Natural &
synthetic rubber. Not recommended for Silicones. |
Lower solids than
AE-72. Better gloss than AE-72.
Recommended for epoxies. |
| AE-75W |
Composite
Molding,
Rubber & Elastomers,
Polyurethanes |
20 minutes @ 125-300F / 55-150C
|
125-400F / 50-200C
|
Composites: epoxy,
prepreg, polyester, vinyl ester & polyurethane. Natural &
synthetic rubber. Not recommended for Silicones. |
Better slip than
AE-72. Wets out best on warm molds. Not for application on hot
tools (>350F/176C). Best water-based choice for polyurethane. |
| AE-82L |
Composite
Molding, Rubber & Elastomers |
15 minutes @ 125-300F / 55-150C
|
ambient-400F / ambient-200C
|
Composites: polyester
& vinyl ester. Natural & synthetic rubber from metal molds.
Not recommended for Fluoroelastomers. |
Shortest cure cycle
of all water-bases.
Good for ambient temp molding. Best applied by spraying. |
|