|
"There
are over 30 specific MoldWiz internal lubricants that will speed
up whatever process you use by giving you fast, easy releases
and smooth, clean parts ready for secondary applications without
cleaning or degreasing."
|
|
INTERNAL
LUBRICANTS / PROCESS AID ADDITIVES
|
| Product
# |
Application |
Description |
| Powders
& Pellets |
| INT-16/3 |
Injection
Molding/Extrusion |
A good choice for
polyolefins and molding resins where good surface lubricity is required.
Similar to INT-33PA but with slightly better heat stability and
slightly lower anti-stat properties. |
| INT-33PA
* |
Injection
Molding/Extrusion,
Rubber & Elastomers |
Recommended
for polyolefins, TPU, Kraton® and thermoplastics where good
surface lubricity is required. Will not effect ability to paint,
bond, or stamp molded parts. Improves anti-stat properties. |
| INT-33UDK
* |
Injection
Molding/Extrusion |
The
choice for polycarbonate. Will not effect clarity of PC and HIPS
resin. Also suitable for acetals. |
| INT-34DLK
* |
Injection
Molding/Extrusion,
Rubber & Elastomers |
Suitable
for polyolefins, ABS, clear styrenics, PET, TPU, natural and synthetic
rubber. Good heat stability for resins processed at high temperatures. |
| INT-35PRC
* |
Injection
Molding/Extrusion,
Rubber & Elastomers |
A good
choice for polyolefins & Ethylene co-polymers. Recommended for
polyolefin elastomers and for thermoplastics where good surface
lubricity is desired. |
| INT-38H
* |
Injection
Molding/Extrusion |
Excellent
for nylons, styrenics and engineering resins processed at high temperatures.
A good flow modifier with good heat stability. |
| INT-44/3PV |
Rubber
& Elastomers |
For
PP, Aflas®, fluoroelastomers, powdered epoxy
resins and hi-nitrile phenolic rubber. |
| INT-44ABR |
Rubber
& Elastomers |
For butyl rubber. |
| INT-48EPR |
Injection
Molding/Extrusion,
Rubber & Elastomers |
For EPDM / polypropylene
co-polymer. |
| INT-52EPR |
Rubber
& Elastomers |
For
polyacrylates, EPDM. |
| INT-55PV
* |
Injection
Molding/Extrusion,
Rubber & Elastomers |
For
molding vinyl. Also recommended for engineering resins, PES, PBT
and polyester elastomers. |
| INT-325PWD |
Injection
Molding/Extrusion,
Composite Molding |
For
phenolic molding compounds. |
| *
Each component of this formulation has been certified by our raw
material suppliers as having direct USFDA approval for food contact. |
| Product
# |
Application |
| Liquids |
INT-1E-11S
uINT-4E-11S
uINT-4E-11CC |
Decorative
Laminates |
INT-1E-15S
uINT-1E-18S
uINT-4E-15S |
Decorative
Laminates |
INT-1E-117
uINT-2E/AP |
Decorative
Laminates |
| INT-2E/AP |
Decorative
Laminates |
| INT-4E-18CC |
Composite
Molding, Decorative Laminates |
| INT-8E-18S |
Composite
Molding |
INT-12
uINT-1312MS |
Composite
Molding, Decorative Laminates |
| INT-20E |
Natural,
Synthetic Rubber & Elastomers |
| INT-21G |
Natural,
Synthetic Rubber & Elastomers |
| INT-22NR |
Composite
Molding |
| INT-44-800 |
Injection
Molding/Extrusion, Composite
Molding |
| INT-54 |
Composite
Molding, Pultrusion
, Natural,
Synthetic Rubber & Elastomers |
| INT-135PMC |
Composite
Molding |
| INT-320 |
Polyurethanes |
| INT-389A |
Composite
Molding |
| INT-532A |
Injection
Molding/Extrusion, Composite
Molding |
| INT-937 |
Injection
Molding/Extrusion, Composite
Molding, Natural, Synthetic
Rubber & Elastomers |
| INT-1208 |
Composite
Molding, Pultrusion, Polyurethanes |
| INT-1210 |
Composite
Molding |
| INT-1285C |
Composite
Molding |
| INT-1425PNP |
Decorative
Laminates |
| INT-1810 |
Composite
Molding |
| INT-1824L |
Composite
Molding |
INT-1830PN
uINT-1830PB |
Decorative
Laminates |
| INT-1838P |
Composite
Molding |
| INT-1840 |
Composite
Molding |
| INT-1846N |
Composite
Molding, Decorative Laminates,
Pultrusion, Polyurethanes |
| INT-1848PN |
Composite
Molding |
| INT-1850HT |
Composite
Molding, Decorative Laminates,
Pultrusion |
| INT-1854 |
Composite
Molding, Decorative Laminates |
| INT-1856RJ |
Natural,
Synthetic Rubber & Elastomers |
| INT-1858 |
Composite
Molding , Decorative Laminates |
| INT-1866 |
Composite
Molding, Pultrusion |
| INT-1890M |
Composite
Molding, Pultrusion |
| INT-1938MCH |
Composite
Molding |
| INT-1988A |
Polyurethanes |
| INT-3944 |
Injection
Molding/Extrusion |
| INT-3952 |
Injection
Molding/Extrusion |
| INT-AM121 |
Injection
Molding/Extrusion, Composite
Molding |
| INT-AM150 |
Decorative
Laminates |
| INT-EP545 |
Composite
Molding |
| INT-ER8 |
Pultrusion |
| INT-EQ6 |
Injection
Molding/Extrusion, Composite
Molding, Natural, Synthetic
Rubber & Elastomers |
| INT-FR65 |
Injection
Molding/Extrusion, Natural,
Synthetic Rubber & Elastomers |
| INT-PA66HS |
Injection
Molding/Extrusion |
| INT-PF160 |
Polyurethanes |
| INT-PS125 |
Injection
Molding/Extrusion, Composite
Molding |
| INT-PUL24 |
Composite
Molding, Pultrusion |
| INT-SP8 |
Injection
Molding/Extrusion |
| INT-VP250 |
Injection
Molding/Extrusion, Natural,
Synthetic Rubber & Elastomers |
| INT-XL51 |
Composite
Molding |
| INT-XP420/2C |
Polyurethanes |
| Solids |
| IMRI |
Natural,
Synthetic Rubber & Elastomers |
| 3-IMR |
Natural,
Synthetic Rubber & Elastomers |
| INT-1117 Series |
Natural,
Synthetic Rubber & Elastomers |
|