OPEN MOLDING external mold releases - Layup / Sprayup / Bagging
  Application Technique
Application Temp
  Types of Molds   Features   Yields:
highly cosmetic parts or medium cosmetic parts



  Wipe on / ambient
or higher (200°F / 94°C).
Wipe on / ambient.
Aluminum requires sealer.
  Yields high gloss parts. Will not pre-release.
No polishing. Will not interfere with taping.
  highly cosmetic
  850   HVLP Spray / ambient or higher (120°F / 50°C).   All.
Initial sealer recommended.
  Especially for large molds in high production where spraying is desirable.
Just spray - no polishing required.
  highly cosmetic
  19SAM   Wipe on / ambient.   All. Especially good for plated and epoxy molds.   High slip, high durabilty. Good for non-gelcoated, DCPD resins etc.   medium cosmetic
  Wipe / spray and polish
/ ambient.
  All.   Gloss or matte finish releases for polyester, epoxy & prepreg applications.
WS-18 Sealer recommended.
  highly cosmetic



  Wipe on / ambient or higher (120°F / 50°C).
Easily wet polishes.

Fluoropolymer release. Easy to use & handle. Offers multiple release from a single application.

Extra luster formulation.

  highly cosmetic
  PasteWiz   Wipe on and polish.   All.   Polymer paste wax. Easy to use.   highly cosmetic




Semi-Permanent Mold Releases

1 gallon / 4 gallon case / 55 gallon drum (solvent-based XTEND releases are not sold in 5 gallon pails)


External Mold Releases

1 gallon / 4 gallon case / 5 gallon pail / 55 gallon drum (F-57NC also available in aerosol cans)


External Mold Releases

Available in bulk and also in cases containing
(12) 14oz / 400g cans

The products in this website are just a sampling of the hundreds of internal and external release agents and process aid additives that AXEL manufactures. If you don’t see what you need, call us. Chances are we already have a product that is just right. If not, we can custom formulate to meet your exact requirements.

All AXEL products are formulated from raw materials that comply with the chemical substance inventory lists of TOSCA, DSL, MITI, EINECS, Australia & Korea.

To learn how a MoldWiz® and/or XTEND™ product can improve your production and profits, call AXEL’s technical service representatives at (800) 332-AXEL or (718) 672-8300 for a free sample to meet your specific needs.


Axel Plastics Research Laboratories, Inc.
Box 77 0855, Woodside, NY 11377 USA
Tel: (718) 672-8300 • Fax: (718) 565-7447
E-mail: [email protected]


©2002 Axel Plastics Research Laboratories, Inc.