EXTERNAL
MOLD RELEASES - Availability:
1 gallon, 5 gallon, 55 gallon containers |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
![](../r-vert-m.jpg) |
![](../r-vert-wm.jpg) |
249
Series |
|
Non-flammable
water / alcohol emulsions. Convenient to use and easy to dilute. |
|
EM-303SF2 |
|
Fluoropolymer
emulsion. 100% water-based. |
|
WB-GR60 |
|
High
slip. A good alternative to silicone. |
|
|
![](../r-vert-sm.jpg) |
F-57NC |
|
Fluoropolymer
release. Excellent for Viton®. Also available in aerosol
cans. |
|
AZN |
|
A
mixture of phosphate esters & fatty acids provides a wet
film release. Also available in aerosol cans. |
|
|
|
|
![](../r-vert-wa.jpg) |
W-7280 |
|
Especially
good for molding EPDM. |
|
W-3201 |
|
Designed
for application on warm molds. An especially good choice for
molding HNBR & silicone rubbers. |
|
W-3211 |
|
Especially
suitable for peroxide cured elastomers. |
|
W-4002 |
|
A
reactive resin solution which cures to a durable release film.
Best applied to hot molds, 180°F / 80°C or higher, or
heat cured after application. May be used to mold at temperatures
up to 1000°F / 537°C. |
|
|
![](../r-vert-sol.jpg) |
19SAM |
|
A
reactive resin solution which cures to a durable high slip release
film. Applied at ambient temperature. |
|
19WAM |
|
A
reactive resin solution which cures to a durable high slip release
film. Applied to warm molds (120°-180°F / 40°-90°C). |
|
19HAM |
|
A
reactive resin solution which cures to a durable high slip release
film. Applied to hot molds (180°F / 82°C or higher). |